Glory B Flat Clarinet


1100 WRMS - 6 Channel Amplifier


  •         Ultra-compact, high density aluminum alloy chassis provides superior thermal stability
  •         Four layer, glass epoxy circuit board for enhanced performance and reliability
  •         Circuit board conformal coated (water resistant) for marine applications
  •         Full Range Class D amplifier technology
  •         Bridgeable for high power operation (CH1+CH2/CH3+CH4/CH5+CH6)
  •         Balanced differential inputs for superior noise rejection
  •         Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input
  •         Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC)
  •         Fully variable, 12dB per octave, electronic crossover
  •         Remote level control for Channels 5 and 6 included
  •         Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller
  •         Top mounted controls for convenient adjustment
  •         Integrated soft clip light for quick system set-up
  •         Illuminated logo


RMS Power Rating
  • RMS Power (2Ω):  150 W X 4/250 X 2  
  • RMS Power (4Ω):  90 W X 4/150 X 2  
  • Bridged (mono 1Ω): N/A
  • Bridged (mono 2Ω): N/A
  • Bridged (mono 4Ω): 300 W X 2/500 W X 1 (Ch 5/6 Bridged)
  • Topology: Full Range Class D
Power Supply
  • Power Supply: Full PWM
  • Power Supply Threshold: 10.0VDC-17.0VDC
  • Idle Current: (0.7A)
  • THD (1KHz@4Ω) : 0.03%
  • S/N Ratio(A weighted@1W): -76.7dBA
  • S/N Ratio(A weighted@FP): -96.7dBA
Input Sensitivity
  • Low Input Level: 0.2mV-10.0V
  • High Input Level: Yes - Up to 25W RMS
Input Impedance
  • Low Input Level: 22 KΩ
  • High Input Level:
Output Stage
  • Output Impedance: 0.051Ω 
  • Damping Factor (50Hz@4Ω): >70
  • Bandwidth (-3dB): 10Hz-35KHz
Crossover(@12dB per Octave)
  • Variable High-Pass: 40Hz - 400Hz 
  • Variable Low-Pass: 30Hz - 400Hz
  • Variable Sub-Sonic: N/A
Recommended Fuse Rating
  • ATC: N/A
  • Length x Width x Height (Inches): 12.5 x 5.27 x 1.75
  • Length x Width x Height (mm): 317.6 x 133.9 x 44.5






Below is the link to the Hex Series Amplifiers Manual. Click it and it will open the manual PDF in a new tab.

(After opening in new tab....Right click if you want to save to your computer)


    More in this category: HXM800.4D »