Notify me when this product is in stock:
Look no further if you are seeking a solution when challenged with space limitations for adding bass to your car audio system. The Diamond DMD shallow series subwoofers measure in with only 3 inches of depth and perform best in sealed enclosures performing just like a conventional full-size subwoofer but taking up less space. For optimum bass response, we recommend using two DMD shallow subwoofers in a narrow 1 cubic foot enclosure. The added surface area provided by the additional subwoofer will more than double the bass output!
True-fiber weave paper backed parabolic cone - NBR half-roll surround optimized for linear travel - Protective ABS ontemporary designed front trim piece - Die cast frame with integral under and over spider venting - Klippel® DA optimized motor and uspension symmetry - Extremely shallow mounting depth of 3 inches
| Subwoofer Size | 10'' |
|---|---|
| Nominal Impedance (ohms) | 2Ω |
| SPL (db) | 86.1 |
| Re (Ω)[series] | 3.4 |
| Qms | 5.5 |
| Qes | 0.55 |
| Qts | 0.50 |
| Fs-Free Air Resonance (Hz) | 40.0 |
| Vas (Liter) | 22.7 |
| Sd (cm²) | 0.036 |
| BL (T*M) | 14.1 |
| Xmax - Inch(mm) | 7.9 |
| Cms (mm/N) | 0.12 |
| Mms (g) | 128 |
| Pwr (W) NOM/MAX | 250/500 |
| Total Diameter | 10.87'' (276.0mm) |
| Mounting Diameter (inch/mm) | 9.13 “ (232.0mm) |
| Screw Hole Diameter | 10.00" (254.0mm) |
| Mounting Depth | 3.00'' (76.0mm) |
| Magnet Diameter (E) | 5.69" (144.5mm) |
| Grille | Included |
