Diamond Elite DES series amplifiers have been our work horse ever since its introduction last year when it was engineered and designed from the ground up. Smaller than the previous generation and constructed with the same footprint dimensions for all models, these amplifiers have been engineered to sound even more dynamic and to deliver optimal rated power at all impedance levels! A ll Diamond Elite DES series amplifiers feature various switched speaker level turn on options (VOX/DC Offset/REM), utilize the latest digital chipset technology, and provides installation flexibility and all the controls necessary to fine-tune and improve the sound quality of any car audio system.
Notify me when this product is in stock:
Diamond Elite DES series amplifiers have been our work horse ever since its introduction last year when it was engineered and designed from the ground up. Smaller than the previous generation and constructed with the same footprint dimensions for all models, these amplifiers have been engineered to sound even more dynamic and to deliver optimal rated power at all impedance levels! A ll Diamond Elite DES series amplifiers feature various switched speaker level turn on options (VOX/DC Offset/REM), utilize the latest digital chipset technology, and provides installation flexibility and all the controls necessary to fine-tune and improve the sound quality of any car audio system.
Latest High Efficiency Full Range Digital Topology - Surface Mount Component Technology with 4-Layer PCB - Continuous Power Output at 2/4 ohm loads - Common Compact Size with Single Sided Connections and Top Mount Controls - Handles HI and LO level input to 12V - Switched Speaker Level Turn On Options (VOX/DC Offset/REM) - Input configuration switch on 4 and 5 channel amplifiers - Remote Level Control Option - Fully Variable Crossovers, Phase and Boost Provide Precise System Adjustment - Bass Boost EQ Up To 12dB
| Amplifier | 2 Channel |
|---|---|
| RMS Power(2Ω) | 250 W X 2 |
| RMS Power (4Ω) | 200 W X 2 |
| RMS Bridge (mono 1Ω) | N/A |
| RMS Bridge (mono 2Ω) | N/A |
| RMS Bridge (mono 4Ω) | 500 W X1(4 Ω ONLY) |
| Topology | Full-Range Class D |
| Power Supply | Full PWM |
| Power Supply (Threshold) | 10.0VDC – 17.0VDC |
| Idle Current | (0.7A) |
| Distortion - THD (1KHz@4Ω) | 0.05% |
| Distortion - S/N Ratio (A weight @ 1W) | -77.2dBA |
| Distortion - S/N Ratio (A weight @ FP) | -98.9dBA |
| Input Sensitivity Low | 0.2mV – 12.0V |
| Input Sensitivity High | YES - UP to 25 W RMS |
| Input Impedance - Low Input Level | 20 KΩ |
| Output Impedance | 0.047Ω |
| Damping Factor (50Hz@4Ω) | >250 |
| Bandwidth (-3dB) | 10Hz-35kHz |
| Crossover (-12 dB/ Oct) Variable High-Pass | 35Hz - 350Hz |
| Crossover (-12 dB/ Oct) Variable Low-Pass | 35Hz - 350Hz |
| Crossover (-12 dB/ Oct) Variable Sub-Sonic | N/A |
| FUSE Ratings - ATC | 2 X 25A |
| Dimension - Length x Width x Height - Inches(mm) | 11.81″ x 7.25″ x 2.0″ ( 299.9 x 184.2 x 50.8 mm) |
